1–2 minutes

Roof repair, restoration or re-roofing?

Tile roof half coated: original tiles next to red tiles coated with RENOTEC®

Broken tiles, moss, faded colour, leaks: when a roof gets old, there are three options. The right one depends on the condition of the tiles and the roof structure, the roof pitch and the budget.

Repair: isolated damage

A few tiles broken in a storm, a damaged ridge, a leaking gutter: a repair is enough. It is a job for a roofer, who can assess the pitch and the structure underneath, work with the right safety equipment and avoid the mistakes that later lead to damp and frost damage.

Roof restoration with a roof coating

When the tiles are sound but dirty, porous or faded, roof restoration with a coating is the most cost-effective solution. The steps are always the same:

  • replace damaged tiles;
  • clean the roof thoroughly, with high pressure and, where needed, a cleaning agent against moss and algae;
  • apply an acrylic-based primer on very porous surfaces;
  • apply two coats of roof coating and let it dry well.

The roof looks new again, is highly water-repellent and is protected for more than 10 years, at a fraction of the cost of re-roofing. That is exactly how the RENOTEC® system works.

Re-roofing: when nothing else will do

With serious damage, such as a damaged roof structure or many cracked tiles, only re-roofing restores watertightness and thermal performance. Which material is suitable depends on the pitch:

  • clay and concrete tiles: 22° to 90°;
  • fibre cement: 25° to 90°;
  • metal (zinc, copper, aluminium, galvanised steel): also for low pitches from 2°;
  • natural slate: a natural material that is not coated.

Whatever the case: first a survey by a professional, then the decision. More about coatings in what is a roof coating?

Are you a roofer or applicator? RENOTEC® is sold exclusively to roofing professionals. Discover the RENOTEC® roof coating system or ask for our trade prices.

Read also

All articles